CD5Tuner Forums http://www.cd5tuner.com/vbb/ Cd5tuner.com is a community for Honda Accord enthusiasts and tuners. en Sun, 20 May 2012 06:19:02 GMT vBulletin 60 http://www.cd5tuner.com/vbb/images/misc/rss.jpg CD5Tuner Forums http://www.cd5tuner.com/vbb/ A/c compressor not turning on http://www.cd5tuner.com/vbb/showthread.php?t=6902&goto=newpost Fri, 18 May 2012 21:34:17 GMT So my A/C compressor will not turn on. The system has a full charge and I have jumped the High pressure low pressure switch. The condenser fan wont... So my A/C compressor will not turn on. The system has a full charge and I have jumped the High pressure low pressure switch. The condenser fan wont even turn on and I have changed its relay. The fuses are all good and the green light it lit under the a/c button. ]]> Technical thepowderblue http://www.cd5tuner.com/vbb/showthread.php?t=6902 Clicking Noise http://www.cd5tuner.com/vbb/showthread.php?t=6901&goto=newpost Thu, 17 May 2012 21:06:10 GMT Alright I know that theirs already 1000 other threads on this but I cannot figure this out. A bit back my pass side cv boot tore and eventually... Alright I know that theirs already 1000 other threads on this but I cannot figure this out. A bit back my pass side cv boot tore and eventually starting clicking, I replaced that and the noise still persists mainly while turning, starts/stops and over bumps (so basically all the time). In the last month I've replaced the axle, upper and lower ball joints, sway bar endlinks, and tie rod end so I honestly have no idea what it is. Is there a chance the new axle could be faulty?

Help appreciated ]]> Technical 1slowcd5 http://www.cd5tuner.com/vbb/showthread.php?t=6901 Prelude ecu http://www.cd5tuner.com/vbb/showthread.php?t=6900&goto=newpost Thu, 17 May 2012 14:29:35 GMT These obd2 ecu that come from 98 to 01 preludes H22, can't we use them for our engine swaps? Someone keeps telling me that there are 3 types obd2 ecu out there, obd2,obd2a,and obd2b. Is this right? ]]> Technical hotash1 http://www.cd5tuner.com/vbb/showthread.php?t=6900 Radiator leak http://www.cd5tuner.com/vbb/showthread.php?t=6899&goto=newpost Thu, 17 May 2012 13:29:58 GMT Lemme start out by saying that I'm a cheap ass. After replacing my broken radiator cap, and refilling the coolan, this morning I noticed an antifreeze leak. After some investigation, I found a leak in the seam between the radiator neck, and the top tank.

Now, I KNOW that with 225k on the car, and at least one collision with a deer, the right thing to do is replace the radiator. Unfortunately, I don't have the cash right at the moment to do that, or the time, and I need to have the car running tomorrow night, so I'm looking for a quick repair to get me back on the road for a week or two until I can replace the radiator.

So, I am wondering, does anyone know if the radiator neck is soldered into the tank, or held in with epoxy. I'm having a hard time telling just by looking at it. Either one is fine, I am just as capable of soldering as I am of using epoxy, and figure I should be able to make a reasonable repair either way, but I would hate to heat it up with a torch, only to find out that it had been held in with epoxy originally. ]]> Technical Tomh http://www.cd5tuner.com/vbb/showthread.php?t=6899 speedo problem http://www.cd5tuner.com/vbb/showthread.php?t=6898&goto=newpost Thu, 17 May 2012 12:29:19 GMT When i turn on my car the speedo automatically jumps to 10 or so, i start moving it bounces between 10 and 20, and any other speed it stays in its... When i turn on my car the speedo automatically jumps to 10 or so, i start moving it bounces between 10 and 20, and any other speed it stays in its place. the odometer isnt working either. CEL is on too. Im thinking its the VSS but if it is i dont know a reliable place to get one, where it is on the car, or how to replace it, and im not wanting to drop hundreds of dollars to have someone do it for me. also on a side note, how do i tighten my ebrake? I have all discs. ]]> Beginner Technical/Performance 94cd5lx http://www.cd5tuner.com/vbb/showthread.php?t=6898 94 Accord NZ Style! http://www.cd5tuner.com/vbb/showthread.php?t=6897&goto=newpost Thu, 17 May 2012 04:24:37 GMT Hey Guys,

So was actually searching the net for sway bar bushes and here I am haha.

Thought I'd throw in a couple of photos of my ride

Just some 17" Racing Star wheels, Tein Adjustables on the outside.
Tinted taillights
Interior's just standard other than the Momo
JVC Headie, 6", 6x9s and 12" Woofer

Chrome intake and pod filter

And that's about it really
Attached Images
File Type: jpg DSCF0053.jpg (99.7 KB)
File Type: jpg DSCF0054.jpg (94.4 KB)
File Type: jpg DSCF0063.jpg (98.8 KB)
]]> nFusion http://www.cd5tuner.com/vbb/showthread.php?t=6897 Ideas on Head/Engine Swap and Introduction http://www.cd5tuner.com/vbb/showthread.php?t=6896&goto=newpost Thu, 17 May 2012 03:34:26 GMT Hello everyone I am obviouly new to the forums.This is my first CD5 a 94 Accord EX. (Has a F22B2 engine in it) It is a rough shape visually and leaks... Hello everyone I am obviouly new to the forums.This is my first CD5 a 94 Accord EX. (Has a F22B2 engine in it) It is a rough shape visually and leaks are everywhere. It has currently 278,xxx mi. Runs just fine. I am going to try to source another engine and start to rebuild it. My plan is to possibly have a F22B2 with a VTEC head maybe DOHC or B1 head, with head work done lightend/ flywheel/crankshaft etc. I already have a basic intake (have to order a K&N filter soon) and I am running my AEM Twin Fire box with an accel super stock coil. My goals are not a horsepower number but more a comfortable cruiser with the ability to run through cars i.e. civics. (no bashing intened) And I have high hopes to use a Megasquirt ECU to run a wideband 02 and tuning the engine to run at around 17:1 to 18:1 AFR using a custom Water injection system with a high power plasma spark.

www.diyautotune.com They have a new DIY PNP that plugs right into our factory harness it is the N76 76 pin Nippon Denso for all honda 4 bangers.



I know i sound crazy but I like to aim high. A bit on me. I am going on my 5th year of Active duty Army service. I am Ft. Stewart, right now I have 2 different jobs first i was a wheeled vehicle mechanic (diesel mech) and now i a machnist/welder metalworking job. I do almost all my own work for exception of alignments because our craft shops alignment machine is out. I have never rebuilt an engine but I can't wait to do it. Enough rambling.

My main concerns are (yes i have searched the forums) Head swaps, I did not know that DOHC were even an option I though i would be stuck with f22b1 heads only, I have seen posts about f23 heads and such. Headers there are so many on ebay, but I am assuming they are all garbage but I would like to hear from experience.

Thanks guys. :drive: ]]> Technical DDRaptor http://www.cd5tuner.com/vbb/showthread.php?t=6896 Drop Zone coilovers http://www.cd5tuner.com/vbb/showthread.php?t=6895&goto=newpost Wed, 16 May 2012 14:29:03 GMT a question for anyone that might know. would a set of coilovers said to fit 88-00 civics and 92-95 del sols sit 90-97 accords? i knw the del sol and... a question for anyone that might know. would a set of coilovers said to fit 88-00 civics and 92-95 del sols sit 90-97 accords? i knw the del sol and accord are similar. just want to make sure it will work before wasting the couple dollars to get them. thanks in advance. ]]> Suspension 97SE http://www.cd5tuner.com/vbb/showthread.php?t=6895 mercyboy: 1995 Honda accord ex http://www.cd5tuner.com/vbb/showthread.php?t=6894&goto=newpost Wed, 16 May 2012 00:45:03 GMT Here my baby.... Engine ========================================================================================== f22b4 Engine short ram... Here my baby....


Engine
================================================== ========================================
f22b4 Engine
short ram

Interior
================================================== ===========================================
cd player

Exterior
================================================== ==========================================
mugen front lip(damage)....
tein lowering springs with 2.5 inch drop
rota type a rims???( stockies)
racing hart c5 (summers)

future mods
================================================== ========================================
prelude swap
typoon short ram
bismoto pipes
NOT LOW ENOUGH!!!!!!!!!!!!!!!






]]> mercyboy http://www.cd5tuner.com/vbb/showthread.php?t=6894 sometimes my brakes work, sometimes they dont http://www.cd5tuner.com/vbb/showthread.php?t=6893&goto=newpost Tue, 15 May 2012 17:34:36 GMT up until a few days ago, my 95 accords brakes have stopped working. when I go to slow down, the pedal goes all they way to the floor and I can feel... up until a few days ago, my 95 accords brakes have stopped working.
when I go to slow down, the pedal goes all they way to the floor and I can feel it pulsing under my foot. there's also a clicking sound and the steering wheel shakes pretty bad. I haven't been able to remove the wheel because I don't have my jack. its really honestly starting to scare me but I'm in such a bad state right now and this is my only.vehicle so I have to constantly rely on it. any ideas what this could be?

edit: there's plenty of fluid but I have to still pump the brakes a few times for the pedal to actually stiffen up ]]> Beginner Technical/Performance DriftZombie http://www.cd5tuner.com/vbb/showthread.php?t=6893 96 EX Sedan from Wiscompton http://www.cd5tuner.com/vbb/showthread.php?t=6891&goto=newpost Mon, 14 May 2012 03:49:10 GMT What's up guys, new here with my first Accord. Was a civic guy before I found this little gem here in Bumfuck, Wisconsin :bouncy: It's a 96 EX sedan, got her all stock about a month ago with 158k on it, and zero rust, and superr clean errywhere. Big plans for the car.. Pics!

first day I got her-



Did a few things..



Got a little lower..


Then at a local meet..




That's pretty much the most recent, I do have a rear roof visor on now too.. But the rear hasn't been lowered yet because the f'in drivers side rear strut bolt is rusted into the bushing.. But im hoping to get that done within a week, along with rims and such.. Let me know what you guys think :boink: ]]> 96sedanwi http://www.cd5tuner.com/vbb/showthread.php?t=6891 94BigHAccord Checking in CD5 Turner! http://www.cd5tuner.com/vbb/showthread.php?t=6890&goto=newpost Mon, 14 May 2012 01:13:31 GMT Hey CD5 T, Ive been away for a bit but Im back :wave: Been working on the CD a lot lately, just wanted to give some updates :D Got a lot of... Hey CD5 T, Ive been away for a bit but Im back :wave:

Been working on the CD a lot lately, just wanted to give some updates :D Got a lot of interior goodies and I worked on my wheel game since a lot of you guys are picking up the heat lol. The East is coming out this summer! More to come :tu:

Running the new XXR 530's that come out this last week, 17 by 9.75

I have Yokohama S drives in size 225/35/17







Some interior

]]> 94BigHAccord http://www.cd5tuner.com/vbb/showthread.php?t=6890 Tire choice http://www.cd5tuner.com/vbb/showthread.php?t=6888&goto=newpost Sun, 13 May 2012 21:04:41 GMT So I am running a 15x8 rim. What tire size should I run 195/50/15 195/45/15 185/55/60 any thoughts of pics on Cds would greatly help. So I am running a 15x8 rim.
What tire size should I run

195/50/15
195/45/15
185/55/60

any thoughts of pics on Cds would greatly help. ]]> Suspension jhoff_wagon http://www.cd5tuner.com/vbb/showthread.php?t=6888 Clock staying on http://www.cd5tuner.com/vbb/showthread.php?t=6887&goto=newpost Sun, 13 May 2012 18:42:52 GMT hey guys im new to the site but ive been in the Honda game for awhile :D, so heres the deal i bought a 96 Accord EX sedan (CD5) as a roller for about... hey guys im new to the site but ive been in the Honda game for awhile :D, so heres the deal i bought a 96 Accord EX sedan (CD5) as a roller for about 600 and now its 9 months l8r and im almost done with my h22 swap :evil: all im waiting on is my chasebays harness but im a little worried about my wiring because my clock stays on all the time with my battery conected :banghead: and i dont know why please help if you can. :help: ]]> Beginner Technical/Performance DemoCD5 http://www.cd5tuner.com/vbb/showthread.php?t=6887 cl door panels http://www.cd5tuner.com/vbb/showthread.php?t=6886&goto=newpost Sun, 13 May 2012 18:12:12 GMT Will cl door panels fit in a 94 accord coupe? They look really similar but the door handles look different. Any info on this would be greatly... Will cl door panels fit in a 94 accord coupe? They look really similar but the door handles look different. Any info on this would be greatly appreciated. ]]> Interior boomer91 http://www.cd5tuner.com/vbb/showthread.php?t=6886